New Construction

This page and associated pages will outline guidelines that you should follow to start the process of either applying for a new electric service to be installed, relocating existing lines on your property, or upgrading your existing service. To apply as a new construction customer you must be installing a new meter socket and not have previously had power at this particular location. Rebuilding an electric line could be either moving an overhead or underground line to a new location or changing the wire from overhead to underground or vice versa. If you are upgrading your meter socket to either make sure it's up to code or you just need more power because you're using more electricity, we can check the wire and transformer size to make sure that it is adequate to serve your needs. For this option a coordinated appointment might be required between your electrician and our foreman.

No Electrical Hook-Ups Will Begin Until - Document Application for New Service - Document Commercial/Residential Application Procedures - Document Specific Location Diagram - Document Wiring Affidavit - Document Easements: Easement Check List - Document Sample Easement Form - Document Blank Easement Form - Document Underground Release Form - Document

Rebuild Construction

Specific Location Diagram - Document Commercial/Residential Application Procedures - Document Wiring Affidavit - Document Easements: Easement Check List - Document Sample Easement Form - Document Blank Easement Form - Document Underground Release Form - Document

Electric Service Spec. Sheets

Residential Wiring Information - Document Underground to Building - Document Underground to Pedestal - Document Overhead to Building - Document Overhead to Pole - Document Off-Peak and Dual Fuel Options General Information - Document Off-Peak Meter Socket Diagram - Document Interruptible Electric Service Agreement - Document